Jynxbox dead --does npot power up.

[mpjassal]

I got it 5 weeks ago, worked for 10 days fine after that its dead since then.

Any ideas, help...

I like the box, but starting to think it is faulty.

Dealer dos not support.

please advise

[Anubis]

4 weeks after the issue of being dead (whatever that is) you report it????
Why does your dealer not support it? Oh wait.... you got it from a unauthorised source right.

Have you tried it in another outlet at home? Have you left it unplugged overnight then tried to turn it on 24hrs later.
Do you have the back switch accidently turned off?

Do you have power going through it and it turns on?

Maybe if you explain what "dead" is I nor anyone else would not be guessing at what kind of help you need.

[whoknows]

If it is dead the first thing to try is a different plug outlet.

[mpjassal]

Yes I tried it in another outlet, still the same.

Dead means no lights in the front, no picture on the TV.

I tried connecting to PC with serial cable, gives message on the loader box in error status/ not on.

[Crazy Carl]

do you know anything about circuit boards, if so open the box up and test to see if your power supply has any voltage

[Mr Hanky]

Had the same thing happen,when I turned the rear switch off then on it dumped the tsop.Believe it was a bug in the 175 file,others had the same results.When checking though the power board and fusing all was good.It does have the terminal pins to j tag it,without a released program.Looks like you are screwed if you cant return it.

[bestboy]

All of these new HD FTA boxes does not seem to have the quality that the old FTA boxes used to have (eg. SV 8000HD, NF HD and VS9000HD). That is why these newer boxes are so much cheaper.

Many people have had this problem of not powering up even on Dreamlink HD and now the Jynxbox. Quality is not there for these new boxes and that is why they are cheaper.

Even the EPG guide are so much better on the old boxes compared to the new ones. You'd figure the advance in technology would make the EPG better on these new units, instead its getting worse. Can not understand it.

[bestboy]

All of these new HD FTA boxes does not seem to have the quality that the old FTA boxes used to have (eg. SV 8000HD, NF HD and VS9000HD). That is why these newer boxes are so much cheaper.

Many people have had this problem of not powering up even on Dreamlink HD and now the Jynxbox. Quality is not there for these new boxes and that is why they are cheaper.

Even the EPG guide are so much better on the old boxes compared to the new ones. You'd figure the advance in technology would make the EPG better on these new units, instead its getting worse. Can not understand it.

The Dreamlink HD has been showing incorrect programming information in EPG since day one. This glitch still has not been fixed, and its been almost a year since the receiver was released. You start to think that maybe no fix exists for this problem.

[iq1800]

on the back of the jynx there is a spdif port pull out that plug and see if it is flashing red, if it is then the box is powered up.

[WebWizard]

Dealer dos not support.

please advise

well let me guess. You didn't buy it from a real dealer but either from some clown on fleabay or direct from China. Either one and you will not have support. Real dealers offer support. My guess is you got it direct from China and possibly they sold you a prototype in a new case

[D Cups]

If it is dead the first thing to try is a different plug outlet.

I LOVE this answer - You, my friend, have been fooling around electronics and/or computers for a LONG time and have been dealing with people that have no clue. I salute you and remember

ALWAYS BACK TO BASICS

[Anubis]

4 weeks after the issue of being dead (whatever that is) you report it????
Why does your dealer not support it? Oh wait.... you got it from a unauthorised source right.

Have you tried it in another outlet at home? Have you left it unplugged overnight then tried to turn it on 24hrs later.
Do you have the back switch accidently turned off?

Do you have power going through it and it turns on?

Maybe if you explain what "dead" is I nor anyone else would not be guessing at what kind of help you need.

I LOVE this answer - You, my friend, have been fooling around electronics and/or computers for a LONG time and have been dealing with people that have no clue. I salute you and remember

ALWAYS BACK TO BASICS

Thought I had that covered....

[lam824]

open you box, unscrew the 4 torch. The is a 2 side(2 cables that convert into a single one) commin out from the rear on/off switch to a 2 pin small plastic box.....the cable some times get loose from that small plastic box when it supposse to be IN....make sure it is completed into that little small white plastic box