Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: how set up VAP11G Wifi Adapter

  1. #1

    Join Date
    Sep 2011
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default how set up VAP11G Wifi Adapter

    I want to connect my fta box satzen with VAP11G Wifi Adapter but It doesn't connect (is non plug and play)
    do I have to put a special bin to be recognized or anybody have the instructions on how to do

  2. #2

    Join Date
    Aug 2010
    Posts
    9,342
    Thanks
    9,538
    Thanked 13,095 Times in 5,692 Posts
    Rep Power
    144

    Default Re: how set up VAP11G Wifi Adapter

    The vonets wifi adapter has to be configured to your home network before it can be used.
    You have to connect it to a pc and configure it with VAP11G software. The software is on the disk provided with the device.

    To configure you have to register the SSID wireless encryption type and wireless encryption pass-phrase

    Once it's configured correctly you will see a blue light indicating that it's connected to your home network. Then you can plug it into the network device of your choice.




    A man only becomes wise when he begins to calculate the approximate depth of his ignorance.
    Carlo Gambino



  3. #3

    Join Date
    Aug 2012
    Posts
    470
    Thanks
    81
    Thanked 122 Times in 95 Posts
    Rep Power
    0

    Default Re: how set up VAP11G Wifi Adapter

    And to think I was about to buy the vonets, and to tell the truth, to this day I don´t regret at all I bought the netgear wifi bridge, it cost me actually a little bit less than the vonets would have cost me anyways and I think I found that the vonets supposedly doesn´t come with any ac adapter at all, that´s why I bought the netgear bridge ultimately.

    And the configuration it´s as easy as you have it running under 2 or 3 minutes, oh! yeah! plug and play.

    I just don´t get it why in these forums keep recommending
    over and over the vonets, what´s the big deal here?

    bridge.jpg

  4. #4

    Join Date
    Aug 2010
    Posts
    9,342
    Thanks
    9,538
    Thanked 13,095 Times in 5,692 Posts
    Rep Power
    144

    Default Re: how set up VAP11G Wifi Adapter

    Quote Originally Posted by VANDERLAND View Post
    And to think I was about to buy the vonets, and to tell the truth, to this day I don´t regret at all I bought the netgear wifi bridge, it cost me actually a little bit less than the vonets would have cost me anyways and I think I found that the vonets supposedly doesn´t come with any ac adapter at all, that´s why I bought the netgear bridge ultimately.

    And the configuration it´s as easy as you have it running under 2 or 3 minutes, oh! yeah! plug and play.

    I just don´t get it why in these forums keep recommending
    over and over the vonets, what´s the big deal here?

    bridge.jpg
    That's wonderful that you like your netgear, but the original poster isn't in the market to buy a wireless adapter he is in the process of setting one up and asking for assistance.

    Please read the threads more carefully before posting...




    A man only becomes wise when he begins to calculate the approximate depth of his ignorance.
    Carlo Gambino



  5. The Following User Says Thank You to homer_™ For This Useful Post:

    VANDERLAND (12-27-2012)

  6. #5

    Join Date
    Sep 2011
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Re: how set up VAP11G Wifi Adapter

    Quote Originally Posted by homer_™ View Post
    The vonets wifi adapter has to be configured to your home network before it can be used.
    You have to connect it to a pc and configure it with VAP11G software. The software is on the disk provided with the device.

    To configure you have to register the SSID wireless encryption type and wireless encryption pass-phrase

    Once it's configured correctly you will see a blue light indicating that it's connected to your home network. Then you can plug it into the network device of your choice.
    I programed the vonets with the cd that come with but something is wrong because the computer can't get the ip address.
    when I finish the programing it says like everything is been successful.But I think that suppose to say your vonet ie now associated with the network.(some like that)
    I tried in 3 computers with the same result.
    I troubleshoot in the computer (repair) but keep saying can't get ip address

  7. #6

    Join Date
    Nov 2012
    Posts
    293
    Thanks
    97
    Thanked 108 Times in 78 Posts
    Rep Power
    3

    Default Re: how set up VAP11G Wifi Adapter

    is both lights flashing?
    if both dont flash it wont pull ip even though program was successful.

  8. #7

    Join Date
    Sep 2011
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Re: how set up VAP11G Wifi Adapter

    only one light and is closer to the power icon I believe
    also the light is yellow
    so that means should be 2 lights?

  9. #8

    Join Date
    Aug 2010
    Posts
    9,342
    Thanks
    9,538
    Thanked 13,095 Times in 5,692 Posts
    Rep Power
    144

    Default Re: how set up VAP11G Wifi Adapter

    Quote Originally Posted by willpen View Post
    only one light and is closer to the power icon I believe
    also the light is yellow
    so that means should be 2 lights?
    The light should turn blue when it's successfully configured to your network.




    A man only becomes wise when he begins to calculate the approximate depth of his ignorance.
    Carlo Gambino



  10. #9

    Join Date
    Sep 2011
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Re: how set up VAP11G Wifi Adapter

    and the only light is not flashing is steady on

  11. #10

    Join Date
    Nov 2012
    Posts
    293
    Thanks
    97
    Thanked 108 Times in 78 Posts
    Rep Power
    3

    Default Re: how set up VAP11G Wifi Adapter

    blue and orange i believe.
    yes 2 lights alternate flashing.
    i have read on these coming doa on a few instances.
    when programmed and working you should be connected to internet on the pc you used to program vap11g with.
    maybe contact retailer you bought from if it does not work.

  12. #11

    Join Date
    Sep 2011
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Re: how set up VAP11G Wifi Adapter

    could be the security (wap2)
    I don't want to take security off.
    Bu the vonets Found everyrthing
    I just put the password that my router has for my network signal.
    OR could be no connection because my Internet is wireless (not a Phone)

  13. #12

    Join Date
    Sep 2011
    Posts
    9
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    0

    Default Re: how set up VAP11G Wifi Adapter

    Quote Originally Posted by tryan_bryan View Post
    blue and orange i believe.
    yes 2 lights alternate flashing.
    i have read on these coming doa on a few instances.
    when programmed and working you should be connected to internet on the pc you used to program vap11g with.
    maybe contact retailer you bought from if it does not work.
    so probably is a bad vonets

  14. #13

    Join Date
    Nov 2012
    Posts
    293
    Thanks
    97
    Thanked 108 Times in 78 Posts
    Rep Power
    3

    Default Re: how set up VAP11G Wifi Adapter

    you can picture the dongle talking to network(when it flashes).
    you have to supply 5-15v. from a ps or use the usb but make sure usb is giving power.
    solid light means its not working even though you can program.
    unsecure router and re do dongle without pass and see if it works.

  15. #14

    Join Date
    Aug 2010
    Posts
    9,342
    Thanks
    9,538
    Thanked 13,095 Times in 5,692 Posts
    Rep Power
    144

    Default Re: how set up VAP11G Wifi Adapter

    Quote Originally Posted by willpen View Post
    and the only light is not flashing is steady on
    you will get a slow flashing blue when it's successfully configured.
    It will alternate blue and yellow flashes when it's plugged into you network device and exchanging data.




    A man only becomes wise when he begins to calculate the approximate depth of his ignorance.
    Carlo Gambino



  16. #15

    Join Date
    Nov 2012
    Posts
    293
    Thanks
    97
    Thanked 108 Times in 78 Posts
    Rep Power
    3

    Default Re: how set up VAP11G Wifi Adapter

    hxxp://www.vonets.com/

    lots of info there.

Page 1 of 2 12 LastLast

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •